THE SHORT ANSWER
An exclusive, qualified insulation lead in Sweden costs roughly SEK 735 to SEK 1,249 in 2026, with SEK 992 as the working average. At a close rate of one in 5.5 that is about SEK 5,456 per acquired customer, or 11.4 percent of a typical SEK 28,250 to SEK 67,800 project. Sweden sits at a multiplier of 1.30 against a Benelux baseline of 1.0, because small populations plus high click prices make this one of the most expensive markets per lead in Europe, which is exactly why exclusivity matters more here.
Insulation lead prices in Sweden: the 2026 band
Everything below is priced for an exclusive lead, meaning one homeowner who requested a quote, fits your postcodes and job types, and is passed to you alone. A shared lead reaching four insulation contractors carries a lower sticker price and a higher cost per customer.
Price per exclusive lead: SEK 735 to SEK 1,249, average SEK 992
Typical project value: SEK 28,250 to SEK 67,800
Exclusive leads needed per customer: 4 to 7
Cost per acquired customer: around SEK 5,456
Acquisition cost as a share of the job: about 11.4 percent
These figures are a benchmark model, not a survey. They combine an industry base range observed across Western European home-improvement campaigns with a country multiplier for local auction pressure. Treat them as a band to negotiate against, not a quote.
How many insulation leads a month your team can absorb
Volume is only useful up to the point your team can quote and deliver it. At 4 to 7 leads per customer, ten exclusive leads a month in this trade produce roughly 1 to 2 jobs, which at a typical SEK 48,025 project is somewhere around SEK 48,025 to SEK 96,050 of work landing in the diary.
Buy past that and the extra leads do not become extra jobs, they become slower callbacks on all of them. The pattern is consistent: businesses that raise volume before fixing quoting capacity see cost per acquired customer rise even though cost per lead is unchanged.
So set volume from installed capacity rather than from ambition, and raise it in steps you can staff. In Sweden that usually means one increase per quarter, timed ahead of the September to December peak rather than during it.
The mistake that wastes the most insulation budget
Chasing subsidy traffic without checking eligibility. Subsidy-driven searches convert into enquiries at high rates and into work at low ones, because a large share of that traffic does not qualify. Filtering on ownership and building year at the form stage costs you volume and improves the economics considerably, and that trade is what this whole category runs on.
When insulation leads are cheapest in Sweden
Insulation demand peaks in September to December and bottoms out around May to July, driven mostly by energy labels and heating bills.
Off-peak leads typically run 20 to 40 percent below the figures above, but they take longer to convert and more of them go cold. Buying volume in the trough and nurturing into the peak is the cheapest growth available in this trade, and almost nobody does it because it requires spending money in the month the phone is quiet.
How Swedish homeowners buy
The process is digital and document-driven, with homeowners comfortable comparing detailed written quotes without a call. Response speed matters, but completeness matters more, and an installer who sends a clear specification the same day is usually shortlisted regardless of price position.
Currency and cost comparison
Prices are quoted in krona, and comparing a krona cost per lead against a euro benchmark without separating the exchange rate from the auction multiplier produces conclusions that are simply wrong. Both effects are real and they need to be read separately, which is how the figures on this page are built.
What qualification actually removes
The buyer behind these figures is a homeowner reacting to a cold winter or an energy label, and what moves them is energy labels and heating bills.
Filtering on building year, surface area, cavity or roof, ownership and timeline removes 30 to 50 percent of raw form fills. The survivors cost more each and close far better. A SEK 1,249 lead you can actually service beats a SEK 441 lead you have to refuse, and the refused lead is not free: it costs a call, a diary slot and a small amount of your team's belief in the channel.
What separates an insulation lead that closes from one that does not
Building year, and whether the target is cavity, roof or floor. Building year tells you the likely construction and therefore the likely method; the target area tells you the size of the job. Without both you cannot price and cannot even confirm feasibility, so the enquiry becomes a free site visit. Two form fields turn most of those visits into either a quote or a fast no.
Where the break-even sits in Sweden
Both work. The break-even is arithmetic, not ideology.
Running your own ads makes sense once monthly media spend passes roughly SEK 58,800 in this market, because at that point the fixed cost of a decent landing page, tracking and someone managing the account spreads thinly enough to beat a per-lead price.
Buying exclusive leads makes sense below that, and whenever you want to switch spend on and off with your capacity rather than commit to a retainer. You pay for outcomes and the supplier carries the auction risk.
Marketplaces and shared leads make sense only if your team genuinely calls inside five minutes, every time. If not, you are subsidising whichever competitor does.
Checklist before you buy insulation leads in Sweden
Is the lead exclusive, or how many other insulation contractors receive it?
Which Swedish regions does it cover? Stockholm, Gothenburg, Malmo and Uppsala behave very differently from rural areas on both price and close rate.
How old is the lead when it reaches you? Past thirty minutes, reach rate collapses.
What is the replacement policy for wrong numbers, wrong area or wrong job type?
Can you switch a postcode or job type off without renegotiating?
Is the price quoted excluding VAT, and in SEK?
A supplier who will not answer all six in writing is selling shared leads with a premium label.
Flock Leads pricing for Sweden
Against the band above, here is what Flock Leads actually charges. Fixed packages, no retainer, no contract term, and every lead goes to one business only.
Starter - 10 leads for EUR 750, which is EUR 75 per lead
Growth - 25 leads for EUR 1,750, which is EUR 70 per lead
Scale - 45 leads for EUR 2,925, which is EUR 65 per lead
Pro - 70 leads for EUR 4,340, which is EUR 62 per lead
Max - 90 leads for EUR 5,400, which is EUR 60 per lead
Leads are matched to the Swedish postcodes and job types you choose, and arrive within minutes of the homeowner asking. Anything you do not use carries forward under the Flock Lead Promise, so a quiet month does not cost you the volume you paid for.
Related answers
Frequently asked questions
How much does a insulation lead cost in Sweden?
Roughly SEK 735 to SEK 1,249 for an exclusive, qualified lead in 2026, with SEK 992 as the working average. Shared leads sell for less, typically SEK 368 to SEK 624, but they reach three to five insulation contractors at the same time.
How many insulation leads do I need to win one job?
4 to 7 exclusive leads, assuming you call inside the first hour. On shared leads plan for two to three times that number.
Why are insulation leads more expensive in some countries?
Because the auction is local. Sweden runs at a multiplier of 1.30 against the Benelux baseline, mainly because small populations plus high click prices make this one of the most expensive markets per lead in Europe, which is exactly why exclusivity matters more here.
When are insulation leads cheapest in Sweden?
In the May to July trough. Demand peaks in September to December, so off-peak leads run 20 to 40 percent below the figures above. They convert more slowly, so only buy them if you have the follow-up discipline to nurture into the peak.
Is it cheaper to run my own ads in Sweden?
Past roughly SEK 58,800 a month in media spend, usually yes, because the fixed costs of page, tracking and management start to spread. Below that, buying exclusive leads is almost always the better arithmetic, and it flexes with your capacity.
What should I qualify a insulation lead on?
Building year, surface area, cavity or roof, ownership and timeline. Those five answers remove 30 to 50 percent of raw enquiries and lift close rate more than any change to your pitch.
NEED A CLEARER PLAN?
Let’s turn your next move into momentum.
Talk to us →